Linux Kernel 3.0/3.01 configuration, compilation and installation in Fedora 14 or 15 :
Hi friends, i have successfully install Linux kernel 3.0 into my fedora OS.
For ncurses development package
After installing the above packages then update your system by running the following command
Once the download complete move to the directory where you have downloaded the kernel package “linux-3.0.tar.bz2“. Now extract the tar file to the location “/usr/src/“.
To move to the directory, for example if the downloaded package is in your Downloads directory. Use the below command.
To extract the tar file run the following command. Type the password for the user when prompted.
Now move to the directory where the extracted file is, or copy and paste the below command in terminal.
Now you can configure, compile and install Linux Kernel 3.0 in your system. Run the commands one by one and type the password for the user, when prompted.
The above command is used to configure the Linux kernel. Once you execute the command, you will get a pop up window with the list of menus and you can select the items for the new configuration. If your unfamiliar with the configuration just check for the file systems menu and check whether ext4 is chosen or not, if not select it and save the configuration. Check the screen shot below for menuconfig.
There are other alternate configuration commands are available and you can find them in README file under linux-3.0 directory.
The above command is used to compile the Linux Kernel. It will take some time to complete it, approximately 40 min to 50 min it depends on your system configuration.
The above command will install the Linux Kernel 3.0 into your system. It will create some files under /boot/ directory and it will automatically make a entry in your grub.conf.
Just check the entry for fedora 3.0.0, if it is in first place then change default=0, if not check for the exact position and give the corresponding value in default.
Restart your system by default it will boot in fedora 3.0.0, you can able to see while booting if not press any key to change it.
To check after booting open a terminal and type “uname -r“. Check the screen shot below.
FOSS LAB - Exercise 1 :
Hi friends, i have successfully install Linux kernel 3.0 into my fedora OS.
here I will explain how to compile and install Linux Kernel 3.0 and Linux Kernel 3.0.1 in Fedora 15. Linux Kernel 3.0.1 stable version has released yesterday and you can download it from kernel.org. If you’re new to Linux then I strongly recommend you try with Linux Kernel 3.0 and not with Linux Kernel 3.0.1. You can later patch it to Linux Kernel 3.0.
You can also follow the same steps to compile and install Linux Kernel 3.0.1 in your system.
Dependencies:
To compile Linux Kernel the following are required to be installed.
- gcc latest version,
- ncurses development package and
- system packages should be up-to date
To install the dependencies run the following commands in terminal and type the password for the user, when prompted.
For gcc
$ sudo yum install gcc
For ncurses development package
$ sudo yum install ncurses-devel
After installing the above packages then update your system by running the following command
$ sudo yum update
Now download the Linux Kernel 3.0 from kernel.org or by using the below command. If your trying with Linux Kernel 3.0.1 then just replace the name linux-3.0 with linux-3.0.1 in all commands below.
$ wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.tar.bz2
Once the download complete move to the directory where you have downloaded the kernel package “linux-3.0.tar.bz2“. Now extract the tar file to the location “/usr/src/“.
To move to the directory, for example if the downloaded package is in your Downloads directory. Use the below command.
$ cd Downloads/
To extract the tar file run the following command. Type the password for the user when prompted.
$ sudo tar -xvf linux-3.0.tar.bz2 -C /usr/src/
Now move to the directory where the extracted file is, or copy and paste the below command in terminal.
$ cd /usr/src/linux-3.0/
Now you can configure, compile and install Linux Kernel 3.0 in your system. Run the commands one by one and type the password for the user, when prompted.
To Configure
$ sudo make menuconfig
The above command is used to configure the Linux kernel. Once you execute the command, you will get a pop up window with the list of menus and you can select the items for the new configuration. If your unfamiliar with the configuration just check for the file systems menu and check whether ext4 is chosen or not, if not select it and save the configuration. Check the screen shot below for menuconfig.
If you like to have your existing configuration then run the below command.
$ sudo make oldconfig
There are other alternate configuration commands are available and you can find them in README file under linux-3.0 directory.
To Compile
$ sudo make
The above command is used to compile the Linux Kernel. It will take some time to complete it, approximately 40 min to 50 min it depends on your system configuration.
To Install
$ sudo make modules_install install
The above command will install the Linux Kernel 3.0 into your system. It will create some files under /boot/ directory and it will automatically make a entry in your grub.conf.
The files are,
- System.map-3.0.0
- vmlinuz-3.0.0
- initramfs-3.0.0.img
To make it default just modify the grub.conf or menu.lst under “/boot/grub/” directory. Open the file using below command.
$ sudo gedit /boot/grub/menu.lst
Just check the entry for fedora 3.0.0, if it is in first place then change default=0, if not check for the exact position and give the corresponding value in default.
Restart your system by default it will boot in fedora 3.0.0, you can able to see while booting if not press any key to change it.
To check after booting open a terminal and type “uname -r“. Check the screen shot below.
Hope this will be helpful for you!!!
No comments:
Post a Comment